-10%
Connection Cable - MFD15 Gen2 to OBD2
CANchecked
Kundeanmeldelser
Help others choose right. Be the first to write a review!
Skriv en anmeldelseCANchecked Display OBD 2 Cable Kit for MFD15
With the OBD 2 Cable Kit, you'll get the perfect accessory for CANchecked MFD15 displays. This OBD 2 cable allows you to display OBD 2 values on your display.
Finally, the OBD2 cable for CANchecked displays is available! Installation takes just a few minutes, and you can conveniently read all OBD 2 values on your display. Even stored fault codes are displayed!
Simply use the pre-configured OBD TRI files to easily display the values. This way, you have all the important information right at your fingertips.
Here are the key facts about the OBD 2 Cable Kit:
OBD connector with a 2-meter cable for connection to MFD15 The following pins are connected from the OBD connector to the display: Power supply, Ground (Pin 4+5), Can High (Pin 6), Can Low (Pin 14) The power cable is separately led out from the connector (approx. 15 cm) and must be connected to a free fuse slot in the fuse holder. If all slots are occupied, a standard and mini adapter are included in the delivery. the OBD 2 Cable Kit supports all OBD 2 values output by the control unit. You can display up to 64 values on your display, allowing you to gather even more information about your vehicle.
The package includes:
- 2-meter (6ft 6in) OBD 2 cable with Connector B and Connector C for the display
- Standard + Mini fuse adapters
Order the OBD 2 Cable Kit now and expand the functionality of your CANchecked display. Get all the relevant vehicle data on your display and always stay in control.
----------------
Vejledninger og Info
Vær den første til at skrive en anmeldelse om dette produkt!
Din anmeldelse:
At skrive en anmeldelse, skal du være logget ind.
Tilknyttede produkter
Værktøjer
