Grenrør Volvo 16V Rustfri
Exhaust manifold
Kundeanmeldelser
manifold Volvo 16V rustfrit
grene i sort stål til Volvo 16V 740 og 940 eller 240.
lavet af 321L 18Cr-9Ni austenitisk rustfrit stål stabiliseret med noget titan-supplement.
For dem, der ønsker det bedste!
Indbygget rustfrit stål 42,4x2,6 mm god pasform. Kan opnås med enhver turboflange & amp; WG Flange
note.
Hvis du vælger turbolader -tvilling, kan du ikke vælge at have nogen wastegate flans svejset.
To rør vil være tilgængelige for at svejse disse flanger selv. (Ikke inkluderet.)
----------------
Vejledninger og Info
| Bilmärke | Volvo |
| Motorkode | B234 |
The manifold is fairly expensive. For that price I do (as a German) expect a good quality product.
This manifold does not fit to the cylinder head. Either I have to grind the flange (which is too high on some areas) or the head so that it bolts onto it.
The EGT sensor bungs are not 1/8"NPT but G1/8". So the egt sensors will not fit and need a fairly rare 1/8" Npt female to G 1/8" male adapter. Works but is not that "sexy" to look at.
The flanges are machined on a belt sander. Looks like 40 grit. I doubt that it will seal properly, haven't tested it yet. Also they are not 100% flat. I will probably have to go to a machine shop for the final finish.
Welds itself are OK and from the inside all welds are grinded, so the surface is smooth.
Din anmeldelse:
At skrive en anmeldelse, skal du være logget ind.
Pakning
